Scooter Lifts

  1. Home
  2. Scooter Lifts

EZ-1EZ-1 $600.00

The E-Z Carrier Model 1 allows for your total mobility transporting at the most economical value possible. This scooter ramp is designed for those who wish to take
their mobility scooter or power wheelchair on trips but do not have the room to put the
scooter in their car, van or SUV. This scooter carrier's long ramp allows for your total mobility transporting at the most economical value possible. The simple yet functional design requires no batteries, motors or actuators. Simply unfold the ramp, load the
scooter or wheelchair, fold up the ramp, strap and go!
This model is a Fixed Platform and it does not fold up!
Cannot Be upgraded to a fold up model with Flip-up Accessory pack.
Designed for average hitch heights of 11 to 14 ". If out of this hitch height look at EZC-3 Model.

Specifications

  • Carrier 28 X 50 inches
  • RAMP 27 X 42 inches long, single fold
  • Platform size 28'' X 50''
  • 3'' security rail
  • Carrier weight: 66 lbs.
  • Weight capacity 400 lbs
  • Powder coated for a lasting finish (baked on paint) black in color
  • Virtually maintenance free
  • All-steel platform simple installation instructions
  • 10 year limited "Factory Warranty"

* Available for Class ll (1 1/4") or Class III (2") Hitch Receivers**

**Caution Class I hitches also Utilize a 1 1/4" hitch size. Check your hitch to ensure that it is a class II**

EZ-2 EZ-2 $700

The E-Z Carrier Fold up version, allows for your total mobility transporting at the most economical value possible. This wheelchair or scooter Carrier is designed for those who wish to take their mobility scooter or power wheelchair on trips but do not have the room to put the scooter in their car, van or SUV. This model is designed for hitch heights from 11.5 " to 14" This Power Chair carrier's 42 inch ramp allows for your total mobility transporting at the most economical value possible.
The simple yet functional design requires no batteries, motors or actuators. Simply unfold the ramp, load the scooter or wheelchair, fold up the ramp, strap
and go!

EZ-2

When not in use the Carrier folds up

Great for Tight parking lots, Roadways and Garages.

Specifications

  • Carrier
    28 X 50 inches
  • RAMP
    27 X 42 inches long
  • Platform size
    28'' X 50''
  • 3'' security rail
  • 11 Eyelets for secure tie downs
  • Weight capacity 400 lbs
  • Powder coated for a lasting finish (baked on paint) black in color
  • Carrier folds up when not in use
  • Virtually maintenance free
  • All-steel platform simple installation instructions
  • 10 year limited "Factory Warranty"

* Available for Class ll (1 1/4") or Class III (2") Hitch Receivers

Caution ** Class I hitches also utilize 1 1/4" opening. Ensure the you have a class II hitch and not a lower weight rated Class I**

EZ-3

EZ-3 $750

This carrier is designed with either a factory built adjustable 6" riser (Pat-Pend) for low riding vehicles, hitch heights lower than 12" from the ground or high profile vehicles (trucks/SUV's) that have a hitch height in excess of 14", allowing the attachment of a factory designed 6" adjustable drop(Pat-Pend), that allows for the use of a single 42" ramp.

This E-Z Carrier Exclusive design feature is better then trying to fold a bulky and cumbersome 60" inch Double ramp. Of note, Class II (1 1/4") hitches are limited to 140 lbs Max Scooter/Powerchair weights on the Riser due to stresses on the hitch.

EZ-3EZ-3

This scooter carrier's adjustability allows for your total mobility transporting at the most economical value possible. The simple yet functional design requires no batteries, motors or actuators. Simply unfold the ramp, guide your Scooter or Wheelchair up the ramp, fold up the ramp, strap and go!

Specifications

  • Carrier 28 X 50 inches
  • RAMP 27.5 X 42 inches long
  • Platform size 28'' X 50''
  • 3'' security rail
  • 11 eyelets on the security rail for tie-downs
  • Weight capacity 400 lbs
  • Powder coated for a lasting finish (baked on paint) black in color
  • Carrier folds up when not in use
  • Virtually maintenance free
  • All-steel platform simple installation instructions
  • 10 year limited "Factory Warranty"
  • Ships Fed-Ex home delivery in Two Boxes

* Available for Class ll (1 1/4") or Class III (2") Hitch Receivers**

**Caution Class I hitches also Utilize a 1 1/4" hitch size. Check your hitch to ensure that it is a class II**

EZL-1

EZL-1 $1,900

18" of vertical Lift

The EZL-1 electric wheelchair and scooter carrier is the low cost alternative to
the often much higher priced auto lifts that you find today. This scooter carrier is ideal for the
heavier scooters and mid-wheel drive power chairs. Just drive the scooter onto the wide
platform, flip the switch and the handicap scooter lift raises the scooter or wheelchair
automatically.

EZL-1EZL-1EZL-1

285 lb. Capacity


Shipped virtually fully assembled

The scooter lift attaches easily to a standard Class 3 trailer hitch which is a 2 inch opening..
The lift folds up vertically when not carrying the scooter, and has a perforated deck which
greatly reduces wind resistance and allows for maximum visibility when driving with the lift
in the upright position. Wide platform - no narrow runners that you must guide your
scooter onto.

Specifications

  • Platform 28 X 50
  • Class III hitch required
  • Platform size 28'' X 50''
  • 3'' security rail
  • Weight capacity 400 lbs
  • Powder coated for a lasting finish (baked on paint) black in color
  • Fold up when not in use
  • Requires a class III 2'' receiver hitch or stronger
  • Virtually maintenance free
  • All-steel platform
  • Simple installation instructions
  • 1 year limited warranty

* Available for Class ll (1 1/4") or Class III (2") Hitch Receivers**

**Caution Class I hitches also Utilize a 1 1/4" hitch size. Check your hitch to ensure that it is a class II**